QNAP TL-R1200C-RP User Manual

4. Load the tray into the drive bay.
a. Insert the tray into the bay.
b. Push the handle.
5. Power on the JBOD enclosure.
Note
The JBOD enclosure may take up to 30 seconds to detect the new drive.
Installing 2.5-inch Drives on 3.5-inch Trays
For the list of compatible drive models, go to https://www.qnap.com/compatibility.
Warning
• Installing a drive deletes all data on the drive.
• Observe electrostatic discharge (ESD) procedures to avoid damage to components.
•
Moving fan blades: Keep your hands and other body parts away from moving fan
blades.
•
Other moving components: Keep your hands and other body parts away from other
moving components.
1. Power off the JBOD enclosure.
TL-R1200C-RP User Guide
Hardware Installation 12

QNAP TL-R1200C-RP Specifications

General

Storage drive size	2.5/3.5 \
Total installed storage capacity	0 TB
Number of storage drives supported	12
Supported storage drive interfaces	Serial ATA III
USB version	3.2 Gen 2 (3.1 Gen 2)
USB connectivity	Yes
USB connector type	USB Type-C
USB ports quantity	1
USB connector gender	Female
Fan diameter	70 mm
Product type	HDD/SSD enclosure
Product color	Black, Grey
Rack capacity	2U
LED indicators	Fan fail, HDD, Link, Status
Number of fans	2 fan(s)
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Power source type	AC
AC adapter frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
Noise level	33.4 dB
Data transfer rate	6 Gbit/s
Cables included	AC, USB Type-C to USB Type-A
Harmonized System (HS) code	84733080

Weight and Dimensions

Depth	562.5 mm
Width	482 mm
Height	88.6 mm
Weight	11030 g
Package weight	14290 g