QNAP TL-R1200C-RP User Manual

Hot-Swapping Redundant Power Supply Units
JBOD enclosures with redundant power supply units (PSUs) support hot-swapping.
Warning
The NAS may have one or more power supply unit (PSU) cords. To avoid serious injuries,
a trained service technician must disconnect all PSU cords before installing or replacing
system components.
1. Power off the JBOD enclosure.
2. Disconnect the power cord from the electrical outlet and the PSU that you are replacing.
3. Firmly press the latch toward the handle and then pull the PSU out.
TL-R1200C-RP User Guide
Hardware Installation 20

QNAP TL-R1200C-RP Specifications

General

Storage drive size	2.5/3.5 \
Total installed storage capacity	0 TB
Number of storage drives supported	12
Supported storage drive interfaces	Serial ATA III
USB version	3.2 Gen 2 (3.1 Gen 2)
USB connectivity	Yes
USB connector type	USB Type-C
USB ports quantity	1
USB connector gender	Female
Fan diameter	70 mm
Product type	HDD/SSD enclosure
Product color	Black, Grey
Rack capacity	2U
LED indicators	Fan fail, HDD, Link, Status
Number of fans	2 fan(s)
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Power source type	AC
AC adapter frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
Noise level	33.4 dB
Data transfer rate	6 Gbit/s
Cables included	AC, USB Type-C to USB Type-A
Harmonized System (HS) code	84733080

Weight and Dimensions

Depth	562.5 mm
Width	482 mm
Height	88.6 mm
Weight	11030 g
Package weight	14290 g