4. Insert the new PSU.
5. Connect the power cord to the PSU and the electrical outlet.
6. Power on the JBOD enclosure.
Rail Kits
The TL-R1200C-RP is compatible with the following models:
• RAIL-B02
Rail kits are not included with the JBOD enclosure and must be purchased separately. For details, contact an
authorized reseller or go to http://shop.qnap.com.
You can find installation information in the rail kit package.
TL-R1200C-RP User Guide
Hardware Installation 21
To Next Page
Loading...
