- 39 -
Step 5. Enter the IP address, subnet mask and default gateway for the server.
Note:
1. Please contact your ISP or network administrator for the IP address
of primary and secondary DNS servers. When TS-109 plays the role
as a terminal and needs to perform independent connection, e.g. BT
download, you must enter at least one DNS server IP for proper URL
connection. Otherwise, the function may not work properly.
2. If you select to obtain IP address via DHCP, there is no need to
configure the primary and secondary DNS servers. You can enter
“0.0.0.0” in the settings.
Step 6. Initialize disk volume in TS-109 for the first time configuration.
To Next Page
Loading...
General