QNAP TS-109 User Manual

- 91 -
b. Complete all settings and click OK to save or Cancel to quit.
c. The port for remote replication is 873. If you are using two TS-109
servers behind an NAT router, please open the port 873 on NAT router
and forward the port to the corresponding LAN IP of TS-109. Otherwise,
the remote replication service will be blocked by NAT.
Note: To use remote replication, enable Microsoft Networking
service, make sure the destination network share and directory
have been created, and the user name and password are valid to
login the destination folder.

QNAP TS-109 Specifications

General

Brand	QNAP
Model	TS-109
Category	Gateway
Language	English