QOLSYS Panel 2+ - PANEL REBOOT PROCEDURE

TROUBLESHOOTING
If the panel is experiencing difficulties you can often resolve it by resetting the operating
system.
1. From the drop down menu select “Settings”.
2. Select “Advanced Settings” then enter your installer code
3. Select “Panel Reboot”
4. Wait for the panel to restart
QUESTIONS? Contact us at techsupport@qolsys.com
IMPORTANT: Failure to follow these steps properly may
result in data corruption and/or panel failure.
QOLSYS CONFIDENTIAL AND PROPRIETARY
PAGE OF 158 173
?
Swipe down
for access
SETTINGS
ADVANCED SETTINGS
ENTER CODE (1111, 2222)
PANEL REBOOT
FIND IT
PANEL REBOOT