INSTALLER/DEALER SETTINGS
Set the Panel's language toggle to your favorite 2 languages. Choose from English
(United States), Français (Canada), Español (Estados Unidos), Italiano (Italia), Nederlands
(Nederland), Norsk bokmål (Norge), Svenska (Sverige) and Íslenska (Ísland).
Turning this setting off completely disables the “Power Button” on the right side of the
panel and all of it's functions. To re-enable this setting you must first check the box then
follow the on screen prompts to press the “Toggle" switch in the back of the panel
Manually Enable/Disable the LED Status Light on the panel.
NOTE: This setting will automatically be set to Disabled when EN Grade 2 is Enabled.
This is a global setting for all codes used on the panel and changes the input from 4 digits
to 6 digits. When enabled, a “00” will be appended to all existing 4 digit codes
Commercial Sensor and Device
Names
Enabling this features changes the sensor name vocabulary from residential naming to
commercial naming.
When Enabled, Auxiliary Pendants learned into Group 6 behave like a traditional PERS
pendant. The system generates a signal to Alarm.com but does not generate a loud local
alarm that needs to be disarmed between button presses. NOTE: This feature can not be enabled if
Partitions are enabled.
When enabled the panel will display a pop up when entering “Settings” letting the end
user know that Wi-Fi has been disconnected.
QOLSYS CONFIDENTIAL AND PROPRIETARY
PAGE OF 31 173
To Next Page
Loading...
