QOLSYS Panel 2+ - Page 34

PROGRAMMING
INSTALLER/DEALER SETTINGS
Setting
Default
Description
Jam Detection Local Alarm
NOTE: Not evaluated for CE/EN Grade 2
Disabled
When enabled the system will sound a local alarm. “Jam Detection” must be active for
this to function properly
RF Jam Sensitivity Level
NOTE: Not evaluated for CE/EN Grade 2
Normal
Choose between HIGH and NORMAL sensitivity levels
Allow Master Code to Access Security
Sensors
Disabled
Allow the Master Code to access to the Security Sensor icon, including Auto Learn
Sensor, Add Sensor, Edit Sensor, Delete Sensor, Sensor Status & Sensor Group
Open/Close Reports Allowed For
Auto Learn
Enabled
Rather than sending a tamper to auto learn a sensor, enabling this will allow an open/
close of the sensor to trigger auto learn
Panel Glass Break Detector
NOTE: Not evaluated for CE/EN Grade 2
Disabled
Creates an independent zone that leverages the panel’s built-in microphones to act as a
glass break detector. This will fall into the zone order at the time you enable this feature.
NOTE: This feature can not be Enabled if Panel Ambient Noise Detection is Enabled.
Panel Motion Detector
NOTE: Not evaluated for CE/EN Grade 2
Disabled
Creates an independent zone that leverages the panel’s built-in camera to act as an
activity motion detector. This will fall into the zone order at the time you enable this
feature. Motion can trip once every 4 minutes. NOTE: The panel motion detector is for activity
monitoring and automation only (Group 25) and will not create an alarm condition or act as a security PIR. This feature
can not be Enabled if Panel IP Camera is Enabled.
Panel Ambient Noise Detector (beta)
NOTE: Not evaluated for CE/EN Grade 2
Disabled
When Enabled, the Panel's built-in microphones can monitor for loud noise detection
above a settable dB threshold and generate an alert. Useful for MDU, apartments and
short term rentals where noise complaints are a concern. After an alert is generated, a 30
second cool down period is instituted. NOTE: This feature can not be Enabled if Panel Glass Break
Detector is Enabled. Not to be relied upon to prevent hear damage, injury or the like.