QOLSYS Panel 2+ - Page 40

PROGRAMMING
SECURITY AND ARMING
Setting
Default
Description
Secure Arming
Disabled
Require user code for arming the panel. NOTE: this option shall be enabled for EN Grade 2.
Refuse Arming When Battery
Low
Disabled
Will not allow panel to arm if battery is low (below 8%). NOTE: this option shall be enabled for EN Grade 2.
Auto Bypass
Enabled
Toggle whether or not to bypass open or tampered sensors automatically. NOTE: This setting is
turned off and greyed out when the “EN Grade 2” setting is enabled.
Auto Stay
Enabled
If panel is armed “Away” but a delay door is not opened, the panel assumes you are still home
and changes arming to “Stay” mode
Arm Stay - No Delay
Enabled
Arm stay immediately with no countdown timer
Auto Exit Time Extension
Enabled
Automatically extend countdown timer if delay door is opened during countdown process a
second time
Keyfob Instant Arming
Enabled
When enabled, turns off exit delay if keyfob is used to arm the system
Keyfob Alarm Disarm
Disabled
When enabled this will Allow a keyfob to disarm alarm events, except panics originating from
the same key fob
Keyfob Disarming
Enabled
When Disabled, a Keyfob will not be able to disarm the panel
QOLSYS CONFIDENTIAL AND PROPRIETARY
PAGE OF 40 173