www.qpcom.com/www.qpcom.com.co
WEP encryption key (secret key) length
Select the SSID from multiple APs.
Select the encryption supported over wireless access. The
encryption method can be None, WEP, WPA, WPA2 or
Use 802.1x
While Encryption is selected to be WEP. Click the check
box to enable IEEE 802.1x authentication function.
Authentication Type Click to select the authentication type in Open System,
Shared Key or Auto selection.
Select the WEP shared secret key length from pull-down
menu. The length can be chose between 64-bit and 128-bit
(known as “WEP2”) keys.
The WEP key is composed of initialization vector (24 bits)
and secret key (40-bit or 104-bit).
Select the WEP shared secret key format from pull-down
menu. The format can be chose between plant text (ASCII)
and hexadecimal (HEX) code.
Secret key of WEP security encryption function.
WPA Authentication
Mode
While Encryption is selected to be WPA. Click to select the
WPA Authentication Mode with Enterprise (RADIUS) or
Personal (Pre-Shared Key).
Select the Cipher Suite for WPA encryption.
WPA2 Cipher Suite Select the Cipher Suite for WPA2 encryption.
Format
While Encryption is selected to be WPA.
Select the Pre-shared key format from the pull-down menu.
The format can be Passphrase or Hex (64 characters).
[WPA, Personal(Pre-Shared Key) only]
Fill in the key value. [WPA, Personal(Pre-Shared Key)
only]
Enable
Click to enable Pre-Authentication.
[WPA2/WPA2 Mixed only, Enterprise only]
Authentication
Set the IP address, port and login password information of
authentication RADIUS sever.
Click the Apply Changes button to complete the new
configuration setting.
Click the Reset button to abort change and recover the
previous configuration setting.
To Next Page
Loading...
Need help?
General