www.qpcom.com/www.qpcom.com.co
II. Time Zone Setting
This page is used to enable and configure NTP client.
III. LAN Interface Setup
This page is used to configure local area network IP address and subnet mask.
You can maintain the system time by synchronizing with a public server ever the internet.
Enable NTP client update
Automatically Adjut Daylight Saving
Time Zone Select:
NTP server:
2. Time Zone Setting
Next >>
<< BackCancel
192.5.41.41- North America
(GMT+08.00)Taipei
This page is used to configure the parameters for local area network whitch connects to the LAN port of
your Access Point. Here you may change the setting for IP address, subnet mask, DHCP, etc,.
IP Address:
Subnet Mask:
3. LAN Interface setup
Next >>
<< BackCancel
192.168.1.254
255.255.255.0
To Next Page
Loading...
Need help?
General