quadient DS-85i - Page 141

Filling the Sealing Li-
quid Reservoir on
page 70
Check water level,
refill if needed.
Water level low.Flap not sufficiently
moistened.
Clean and replace
brushes on page 121
Check brushes, re-
place if needed by the
extra soaked set.
Brushes dry.
Clean and replace
brushes on page 121
Check brushes, clean
if needed.
Brushes dirty.
Filling the Sealing Li-
quid Reservoir on
page 70 #
Check the moistening
felt, refill water tray if
needed.
Moistening felt dry.
Replace or clean
moistening cloth on
page 121
Check the moistening
felt, clean if needed.
Moistening felt dirty.
Clean and replace
brushes on page 121
Replace brushes.Brushes worn out.
Replace or clean
moistening cloth on
page 121
Replace moistening
felt.
Moistening felt worn
out.
# Editing a job on
page 48
Check fold settings,
adjust if needed.
Inserted document
too big.
Envelope not always
ejected from sealer.
Verifying the Insert
Position on page 39
Check adjustment of
envelope stop posi-
tion and fingers.
Document not inser-
ted deep enough.
Maintenance Sched-
ule on page 120
Clean sealing area.Sealing area dirty.
10
English
137
| Page 137 | Nov-25-2020 04:16 | Fault Finding