5. Loosen a stack of envelopes and place the stack on top of the bottom envelope
between the side guides.
6. Move the side guides towards the envelopes.
The space between the side guides and the envelopes should be such that the
envelopes have just enough play to move freely.
If the distance between the side guides is too large, the envelopes
will twist sidewards, when transported into the machine.
7. Shift the envelope support in or out. The top side of the envelope must touch the
dotted line on the support.
8. Turn the envelope support to distribute the weight of the envelopes evenly on both
sides.
Filling the Sealing Liquid Reservoir
When you want to seal envelopes, the sealing liquid reservoir must be filled.
Open the front cover A.1.
70
| Page 70 | Nov-25-2020 04:16 | Loading the System
5
English
To Next Page
Loading...