Document Separation
The term ‘Document separation’ refers to the adjustment required for separating the upper
document from the rest of the documents in the stack. This prevents pulling too much
documents from the stack at the same time.
The document separation for the automatic feeders is set automatically; there are no manual
adjustments needed.
Feeders 3st can be special feeders. The document separation for special feeders must be
adjusted manually. While special feeder trays fit in all positions, adjusting the separation
is only possible when they are fitted on position 1 and 2.
To adjust the separation of special feeders follow the instructions as described in Adjust
the Separation of Special Feeders on page 43.
maxiFeeder
Adjust the maxiFeeder Side Guides
5
English
59
| Page 59 | Nov-25-2020 04:16 | Loading the System
To Next Page
Loading...