Processing Mail
34
3
Applying Standard Postage
Sequence of Settings
The procedure below outlines steps to process mail.
As mail requirements differ from day to day, some of the settings may not be nec-
essary, or their order may vary.
How to Apply Standar d Postage (Settings)
How to Apply
Standard
Postage
(Settings)
Required settings:
1 Make sure you are on the Home Screen of the Normal type
of imprint .
The Home Screen indicates weight, postage and currently
selected rate as illustrated above.
2 To change the type of imprint (if you are not in Normal mode)
.
Press
and type
1 to access the
Imprint
screen.
The type of imprint is indicated on the 2nd line of the screen.
To change the type of imprint:
Select the
Type
line.
Press [OK] and then select Normal in the
Type of imprint
screen.
Press [OK].
At this point, make sure you have completed the preparation
steps mentioned in
Preparing and Starting your Work Session
p.27.
ALPHA1_UK.book Page 34 Jeudi, 6. septembre 2012 4:08 16
To Next Page
Loading...
Need help?
General
