CV100LG User Manual
QSZCAMCV100LGUM0304 23
The threshold of voltage
detection
Detection switch
The debounce Time setting
4.16. Changing the Wi-Fi mode
The product provides the alternative access point and station dual modes.it accepts the 5
clients max. connection for Wi-Fi sharing in access point mode. Meanwhile, it's able to join
the Wi-Fi network for local data transmission working at station mode.
The SSID name that Dash
Cam broadcast
The Wi-Fi feature switch
and modes options
The password that Dash
Cams Wi-Fi
The hotspots name that
Dash Cam connects
The password of hotspots
that Dash Cam connects
4.17. Adding the BLE panic button
In order to trigger the manual event more convenient, the product is available to add 10 pieces
panic button over BLE Bluetooth. The product detects the button event and trigger the
recorder after you short-click the button.
*For the private car, taxi that using 12V vehicle battery, the threshold value should be less than
12000mV. 10000mV and 115000mV are recommended.
*For HGV, LGV that using 24V vehicles battery, the threshold value should be less than
24000mV. 23500mV and 23000mV are recommended.
* The product supports 2.4Ghz WiFi radio, please configure it to connect the 2.4Ghz access
point while it’s working in STA mode.
* The product enable WiFi AP mode while it detects ignition on automatically, and wait 5 mins
before switch off if no clients connect it.
*The product only works in ether AP mode or STA mode, please examine the settings after
configuration.
To Next Page
Loading...
Need help?
General