Issue 1.5 Q-Drive Installation Manual
Copyright © 1996 Quin Systems Ltd. Page 5
2. Unpacking and Inspection
Inspect the packaging for external signs of damage if possible before signing the
delivery receipt, as this may indicate that the goods have been mishandled in transit.
When unpacking the Q-drive, keep all the packaging materials if possible. If it is
necessary to ship the Q-drive to another site, or to return it for service, the original
packing can be reused.
Inspect the Q-drive carefully when it is unpacked. Check for any loose parts, any circuit
boards loose in their card guides, cables not connected, or any bending of the case or
chassis.
If any defect or damage is suspected, do not connect power to the system
. Notify
the carrier immediately, and contact your sales office or the Quin Systems Service
Department:
Quin Systems Limited
Service Department
Oaklands Business Centre
Oaklands Park
Wokingham
Berkshire RG11 2FD
England
Telephone Wokingham (01734) 771077
Fax (01734) 776728
To Next Page
Loading...
General