Quin Q-drive - Parameters; Figure 20: Q-Drive.exe: Page 9 Parameters

Issue 1.5 Q-Drive Installation Manual
Copyright © 1996 Quin Systems Ltd. Page 43
7.9 Page 9 parameters
Figure 20. Q-Drive.exe: page 9 parameters
74
Max Peak Current (0..127):
This parameter defines the maximum peak current that the drive will deliver
to the motor
75 Max Nominal Current (0..127):
This parameter defines the maximum nominal current that the amplifier will
deliver
76 Manufacturing week:
The week number in which the drive amplifier was manufactured.
77 Manufacturing year:
The year in which the drive amplifier was manufactured.
78 Hardware Version:
The hardware version number or revision number of the drive amplifier.
79 Firmware Version:
The firmware or EPROM revision number.