Cardiac Stress Treadmills Service Manual Safety Requirements A-1
A
Safety Requirements
Cautions and Warnings
• Read this manual in full before operating the treadmill.
• Before each use of this equipment, check the power receptacle for
signs of damage. Do not operate the equipment if the integrity of
these items is in question.
• Be sure the connection for the optional Emergency Off switch is
secure. Test the switch to verify proper operation. Do not operate the
equipment if the integrity of these items is in question.
• Regularly inspect cables and treadmill belts for wear or damage. Do
not operate the equipment if the integrity of these items is in question.
• When connecting auxiliary equipment approved for use with the
monitoring system, be certain the summation leakage current does not
exceed local or provincial standards.
• The treadmill must be on an appropriate, dedicated electrical circuit
with a power rating that meets the electrical specification on the
treadmill serial number label. Nothing else should be connected to the
circuit.
• To avoid potential safety and electrical problems, use parts and
accessories that meet specifications as noted in this service manual
and the user guide for your stress monitor.
• Use of accessories or cables other than those specified, with the
exception of accessories or cables sold by Quinton Cardiology, Inc. as
replacement parts for internal components, may result in increased
emissions or decreased immunity of the treadmill.
• This equipment is classified Class I, Type B, ordinary equipment, not
protected against fluid ingress. It is rated for continuous operation.
To Next Page
Loading...
