Cardiac Stress Treadmills Service Manual Safety Requirements A-3
• If your treadmill is equipped with the rapid deceleration profile, it is
specifically designed to come to a rapid stop. This feature requires
that attendant(s) are available to support and assist the patient user.
Attendants MUST
be in a position to support and assist the patient
when the belt stops.
EMC Declaration Tables
Guidance and Manufacturer's Declaration - Electromagnetic Emissions
The Cardiac Stress Treadmills are intended for use in the electromagnetic environment specified
below. The customer or the user of the Cardiac Stress Treadmills should assure that they are used
in such an environment.
Emissions test Compliance Electromagnetic environment - guidance
RF emissions
CISPR 11
Group 1
The Cardiac Stress Treadmills use RF energy only for
its internal function. Therefore, its RF emissions are
very low and are not likely to cause any interference
in nearby electronic equipment.
RF emissions
CISPR 11
Class A
The Cardiac Stress Treadmills are suitable for use in
all establishments other than domestic and those
directly connected to the public low-voltage power
supply network that supplies buildings used for
domestic purposes.
Harmonic
emissions
IEC 61000-3-2
Class A
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
Complies
NOTE Tests verified with shielded input/output cables only.
To Next Page
Loading...
Need help?
General
