Cardiac Stress Treadmills Service Manual Introduction 1-1
1
Introduction
Cardiac Stress medical treadmills are designed specifically for stress test
applications. The treadmills are not intended to operate independently or
with a treadmill controller. They are designed for use in conjunction with
the stress family of exercise test devices (referred to in this manual as the
stress monitor).
Four stress treadmill models are available: the TM55/TM65 used with the
Quinton Q-Stress Cardiac Stress system and the Burdick Quest Exercise
Stress system, and the ST55/ST65 used with other Quinton stress systems
such as the Q-4500 and the Q710.
The cardiac stress treadmill comes in two voltage ranges: 100-120 VAC
(low voltage unit) and 200-230 VAC (high voltage unit). High voltage
units have a detachable power cord. An emergency stop button is standard
on all CE-marked units and optional on non-CE-marked units.
Emergency Button
Cable Connector
Emergency
Stop Button
(optional on
non-CE-marked
treadmills)