4 Smartcat (BL2100)
1.4 Development and Evaluation Tools
1.4.1 Tool Kit
A Tool Kit contains the hardware essentials you will need to use your own BL2100 single-
board computer. The items in the Tool Kit and their use are as follows.
• BL2100 Getting Started instructions.
• Dynamic C CD-ROM, with complete product documentation on disk.
• Programming cable, used to connect your PC serial port to the BL2100.
• Universal AC adapter, 12 V DC, 1 A (includes Canada/Japan/U.S., Australia/N.Z., U.K.,
and European style plugs).
• Demonstration Board with pushbutton switches and LEDs. The Demonstration Board
can be hooked up to the BL2100 to demonstrate the I/O.
• Wire assembly to connect Demonstration Board to BL2100.
• Plastic enclosure base with mounting screws.
• Screwdriver.
• Rabbit 2000 Processor Easy Reference poster.
• Registration card.
Figure 1. BL2100 Tool Kit
To Next Page
Loading...
