oldest data is replaced. The Detail graph files may not cover a continuous segment of history.
See Detail graph start for details.
Detail Graph start
List box: No, Alarm, Single, Continual
Default = No
Detail graph data sampling is started based on selected event from list box:
No – Detail graph does not start.
Alarm – if a tickbox in Detail graph column (Settings/Alarm management) is checked, then the
Detail graph file is stored in case of that alarm. Twenty samples prior the alarm event and forty
samples after the alarm event are recorded. When another alarm occurs while a Detail graph
file is opened, the sampling continues normally and no other file is opened.
Single – a single Detail graph file can be manually started. After Apply here, go to Diagnost-
ic/Graph where a Start/Stop button is available
Continual – Detail graph files are periodically saved in the same way as Overview graph files
are.
113© RACOM s.r.o. – RipEX Radio modem & Router
Advanced Configuration
To Next Page
Loading...
