RACOM RipEX - Recommended Cables

Standards
CE, FCC, ATEX
ETSI EN 300 113-2 V1.5.1
ETSI EN 302 561 V1.3.2
Spectrum (art 3.2)
FCC Part 90, FCC Part 101
ETSI EN 301 489-1 V1.9.2
EMC (electromagnetic compatibility)
(art 3.1.b)
ETSI EN 301 489-5 V1.3.1
IEEE 1613:2009 Class 1Electric power substations environ-
ment
EN 60950-1:2006
EN 60950–1:2006/A11:2009,
EN 60950–1:2006/A12:2011,
EN 60950–1:2006/A1:2010
Safety (art 3.1.a)
EN 61373:1999Vibration & shock
IEC 980:1989 (seismic category 1a)Seismic qualification
II 3G Ex ic IIC T4 Gc
EN 60079-0:2012
EN 60079-11:2012
Explosive atmospheres
Tab. 4.7: Recommended Cables
LengthRecommended cables and accessoriesPort
Max. 3 mV03VH-H 2×0,5DC terminals – Power
Max. 3 mV03VH-H 1×0,5SI (Sleep Input)
Max. 3 mV03VH-H 1×0,5AI (Alarm Input)
Max. 3 mV03VH-H 1×0,5AO (Alarm Output)
Max. 3 mLiYCY 4×0,14COM1
Max. 3 mLiYCY 4×0,14COM2
Max. 3 mUSB to 10/100 Ethernet Adapter ADE-X5USB
As neededSTP CAT 5eETH
Note – hazardous locations
The cross sections mentioned in above table are the minimal cross sections used under
hazardous location conditions.
RipEX Radio modem & Router – © RACOM s.r.o.58
Product