RACOM RipEX - Page 115

SSH Port
Default = 22
Just for information, can not be changed.
Physical security
List box: Off, On
Default = Off
When "On", external flash disc access is disabled (It is not possible to download or upload
the configuration automatically). When the HW reset button is pressed, "Total purge" instead
of "Factory settings" is applied. The Total purge sets the very same settings as delivered
from the factory. For details see Section 7.7.2, “Configuration”.
Read-only Web Accounts
The two different levels of unit administration privileges are supported:
• admin user is not limited.
• Read-only Web Accounts are limited to read only access. Only Status, Neighbours, Statistic
and Graphs screens are available.
Use the "Logout" link in the top right corner of the screen to logout the current user.
User name
Up to 10 different read-only users can be defined. Maximum length is 32 characters. Only
characters a-zA-Z0-9_ are allowed.
Password
Password length is at least 5 and maximum 32 characters long. Only characters a-zA-Z0-9.:_-
are allowed.
115© RACOM s.r.o. – RipEX Radio modem & Router
Advanced Configuration