RACOM RipEX - Page 207

Please select action (save, apply, cancel):
s
cli_cnf_set_radio: Update saved.
CLI(admin):~$ cli_cnf_set_com 1 -bitrate 19200
Continuing from previous update(s). Updated values:
COM link type: RS232 (RS232)
COM bitrate: 19200 (19200)
COM data bits: 8 (8)
COM parity: Even (e)
COM stop bits: 1 (1)
COM idle size: 5 chars
COM MTU: 1600 bytes
COM handshake: None (n)
COM break length: 1000 chars
Please select action (save, apply, cancel):
s
cli_cnf_set_com: Update saved.
CLI(admin):~$ cli_cnf_apply_change
Do you really want to apply modified configuration? (yes, no)
y
cli_cnf_apply_change: Configuration update accepted, starting to perform. Estimated time ►
to finish: 13000 ms.
cli_cnf_apply_change: You may be disconnected during update.
Remote RipEX COM1 parity configuration
CLI(admin):~$ cli_cnf_set_com 1 -bitrate 9600 -parity e -t 10.10.10.3
Starting new update. Updated values:
COM link type: RS232 (RS232)
COM bitrate: 9600 (9600)
COM data bits: 8 (8)
COM parity: Even (e)
COM stop bits: 1 (1)
COM idle size: 5 chars
COM MTU: 1600 bytes
COM handshake: None (n)
COM break length: 1000 chars
Please select action (save, apply, cancel):
a
cli_cnf_set_com: Configuration update accepted, starting to perform. Estimated time to finish: 4000
ms.
207© RACOM s.r.o. – RipEX Radio modem & Router
CLI Configuration