rada DRV40 User Manual

30
• The 'Disinfection Timeout' can be set up to a maximum of 1800 minutes
(30 hours).
Max.
Hot
Cold
‘Above Setpoint’
‘Below Setpoint’
Min.
Setpoint
Setpoint Default
M
I
X
E
D
T
E
M
P
E
R
A
T
U
R
E
F
L
U
C
T
U
A
T
I
O
N
NORMAL
OPERATION
ALERT
SHUT DOWN
TO FULL COLD
2. Switch 'Valve Control' to 'OFF'.
3. Click 'Set' to transfer the values to the DRV40.
4. Click 'Refresh' and conrm the updated values.
Disinfection Cycle
Warning! Due to the scalding temperature, the disinfection process must be
supervised. The DRV40 should be monitored whilst in disinfection mode and no one
should be allowed to approach within 3 metres of any affected outlets.
1. Click 'Arm' when prepared for disinfection cycle, the 'Disinfection Status' will
conrm.

rada DRV40 Specifications

General

Brand	rada
Model	DRV40
Category	Control Unit
Language	English