EasyManuals Logo
Home>RadComm>Measuring Instruments>RC2PLUS

RadComm RC2PLUS User Manual

RadComm RC2PLUS
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
RC2
PLUS
USER MANUAL REV 9
RC2 PLUS User Manual
150
-
85
-
002 Revision 9.0
August 21,2020
10
3.3 CALIBRATION REQUIRED
For the Basic Mode, if the system requires calibration, ‘CALIBRATION REQUIRED’ will
be displayed on the bottom of the System Test screen. This message will appear
after one year or LED test fails.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the RadComm RC2PLUS and is the answer not in the manual?

RadComm RC2PLUS Specifications

Battery IconBattery
battery life20 hours
battery recharge time fast charge2.5 hrs
battery recharge time via PC USB6 hrs min.
Detector Specifications IconDetector Specifications
PVT size height101.6 mm
PVT size length76.2 mm
PVT size width50.8 mm
Geiger-Mueller tube size diameter12 mm
Geiger-Mueller tube size length45 mm
Response and Sensitivity IconResponse and Sensitivity
energy range15 KeV – 2.0 MeV
sensitivity8 cps/uCi at 1M with CS137
gamma histogram channels256
gamma histogram channel capacity16 bits
accumulate dose5.5 mSv
Weight and Dimensions IconWeight and Dimensions
detector case height18 cm
detector case length23 cm
detector case width10 cm

Related product manuals