Need help?Do you have a question about the RadComm Syclone Portable and is the answer not in the manual?
General| Alarm | Audible and Visual |
|---|---|
| Detector Type | NaI(Tl) |
| Display | LCD |
| Operating Temperature | -20°C to 50°C |
| Storage Temperature | -20° C to +60° C |
| Energy Range | 30 keV - 3 MeV |
Describes the Syclone's sensitive and responsive unit, including its crystal and electronics.
Describes the manual's coverage of firmware release and PC software.
Explains user selection of modes and basic operation steps.
Explains the two primary monitoring functions: SEARCH and IDENTIFY.
Details instrument body, detector, handle, joystick, display, and connections.
Explains the four-position joystick and its various actions for system control.
Details the power-on sequence, startup screens, and initialization.
Describes how to switch between AUTOMATIC, SIMPLIFIED, and MANUAL modes.
Lists and explains various status messages for Search and Identify modes.
Explains the procedure to fine-tune system gain and align the spectrometer.
Details joystick functions and navigation menus specific to Automatic Mode.
Describes the various screens displayed during system startup.
Explains the two functions, SEARCH and IDENTIFY, within Automatic Mode.
Describes the startup screens specific to Simplified Mode.
Explains how to use the Syclone in Simplified Mode for scanning and analysis.
Details the SEARCH function in Manual Mode, including data display and parameters.
Explains the IDENTIFY function, spectrum analysis, and nuclide identification.
Refers to stabilization details in Chapter 2.5.
Describes options for viewing, erasing, and scanning stored data.
Allows technicians to set required operating parameters for the Syclone.
Provides access to library and system status information.
Details specifications for Gamma Nal and Geiger Mueller detectors.
Covers dose accumulation, measurement units, energy, and dose ranges.
Covers adapter voltage, internal source, operating time, and charging.
Specifies operating/storage temps, protection, humidity, vibration, and shock compliance.
Lists standard accessories included with the Syclone.
Recommended parameters for the SEARCH function.
Recommended parameters for IDENTIFY mode.
Recommended parameters for DOSE setup.
To Next Page
