RadComm Syclone Portable User Manual

Sy
clone Portable Gamma-Ray Spectrometer, Revision 10 2.0 DETAILED OPERATION GUIDE
Ra
dComm – Proprietary Page 13 Revision Date: March 3, 2016
outside this temperature range, the following screen will be displayed.
Durin
g identification, if the detector temperature falls above or below the set parameter, the
following screen shot will appear and the unit switches from AUTO to ‘24 hours’ time
stabilization interval.
If this happens during the Search Mode, Status Bar will display
.
IS
OTOPE – Cs-137 is the default radioactive isotope used for stabilization.
2.5.4 STABILIZATION OFF AND CANNOT STABILIZE
If Stabilization is set to OFF, the unit still has the ability to collect spectra, but with NO
NUCLIDE ID.
“STABILIZATION OFF. NO ID!” will be displayed
on the Status Bar.
The following Screen will display if the unit cannot
be stabilized.
If the Syclone detector fails Stabilization, the unit
cannot be used, Call Service, see Appendix Z for
information.
STABILIZE
ST
ABILIZESTABILIZE
STABILIZE
TEMPERATURE EXCEEDS THE
TEM
PERATURE EXCEEDS THETEMPERATURE EXCEEDS THE
TEMPERATURE EXCEEDS THE
RANGE
RANGERANGE
RANGE.
..
.AUTO STABILIZATION
AUTO STABILIZATIONAUTO STABILIZATION
AUTO STABILIZATION
IS DISABLED
IS DISABLEDIS DISABLED
IS DISABLED!
!!
!
07
070
7
07/
//
/08
0808
08/
//
/2011
20112011
2011
16:56:50
ENTER TO CONTINUE
E
N
TER TO CONTINUEENTER TO CONTINUE
ENTER TO CONTINUE

RadComm Syclone Portable Specifications

General

Brand	RadComm
Model	Syclone Portable
Category	Measuring Instruments
Language	English