Radio Shack 20-427 PRO-2054 - Dashboard Installation

10
T
h
e Basics
installing your scanner
You can mount your scanner in your vehicle,
install it for mobility, or install it as a base station.
mounting your scanner
in your dashboard
If you are unsure about how to install your
scanner in your vehicle, consult your automobile
manufacturer, dealer, or a qualifi ed installer.
Before installing, confi rm your scanner fi ts in
the desired mounting area and you have all the
necessary materials. Your scanner requires a
2 x 7
1
/
8
/8/
x 5
5
/
5
/
5
16
inch (50 x 180 x 135 mm)
mounting area.
1. Remove the
four rear screws
and pull off the
black case before
installing your
scanner.
2. Install the DIN
sleeve into the
opening in your
dashboard, lip
facing out.
3. Push out the top
and bottom tabs to hold the sleeve fi rmly in
place.
4. Slide the scanner into the sleeve until it locks
in place.


in your dashboard
If you are unsure about how to install your
scanner in your vehicle, consult your automobile
manufacturer, dealer, or a qualifi ed installer.
in your dashboard
NOTE