Once you fi nd interesting frequencies during the
search, you can store them into the scanner’s
copying a frequency into a
You can copy a frequency into a specifi ed channel
when the scanner stops on that frequency during
search mode or manual tuning.
After about 2 second, the channel to be
2. Press the channel number where you want
to store the frequency. The display indicates
. The scanner displays information
about the channel (frequency or
. All the conditions, such as delay
condition, are copied onto the channel.
Channel number and frequency fl ashes two
times. The scanner automatically returns to
If you try to copy a frequency that is already
stored, the scanner sounds the notice tone 3
want to copy the duplicate frequency anyway,
ENT, or if not, press ENT
If you try to copy a frequency that is already
stored, the scanner sounds the notice tone 3
To Next Page
Loading...
