Radio Shack 20-427 PRO-2054 - Powering Your Scanner

13
T
he Basics
powering your scanner
You can power your scanner from a wall outlet,
through your vehicle’s ignition, or from your
vehicle’s cigarette lighter.
from a wall outlet
1
.
Connect the tip of the supplied AC adapter to
the DC 13.8V jack at the rear of your scanner.
2.
Plug the AC adapter into your wall outlet.
CAUTION:
You must use a Class 2 power
source that supplies 13.8V DC and delivers
at least 600mA. Its center tip must be set to
positive and its plug must fi t the scanner’s
DC
13.8V
jack. Using an adapter that does not meet
these specifi cations could damage the scanner
or the adapter.
WARNING:
To prevent electric shock, do not
use the AC adapter’s polarized plug with an
extension cord, receptacle, or other outlet
unless you can fully insert the blades to
prevent blade exposure.


CAUTION:
source that supplies 13.8V DC and delivers
at least 600mA. Its center tip must be set to
NOTES