programming the priority channel directly
3. Enter the frequency you want to enter into the
priority channel and then press
programming a weather channel as the
2. Select the weather channel you want to
program as the priority channel.
to store the frequency and the
display blinks two times. If you want to cancel
To turn on the priority feature, press
scanning/searching (except WX band).
on the display. If the scanner detects activity
program a weather frequency into the priority
channel and the scanner detects a weather alert
tone in Priority WX mode,
Priority WX is only for receiving a weather alert.
When the scanner detects a 1050 Hz alert tone,
priority WX activates and you receive a weather
To turn off the priority feature, press
Priority WX is only for receiving a weather alert.
When the scanner detects a 1050 Hz alert tone,
priority WX activates and you receive a weather
To Next Page
Loading...
