Radio Shack 20-427 PRO-2054 - From Your Vehicles Cigarrette Lighter

15
T
he Basics
from your vehicle’s cigarrette lighter
To power your scanner from a 12V power source
in your vehicle, such as a cigarette-lighter socket,
you need a 12V, 600 mA DC cigarette-lighter
adapter (not supplied), available at your local
RadioShack store.
1
.
Insert the adapter’s barrel plug into the
scanner’s
DC 13.8V
jack.
2
.
Plug the adapter’s other end into your
vehicle’s cigarette lighter or power socket.
When you use a cigarette-lighter adapter, you
might hear electrical noise from your engine
while scanning. This is normal.
vehicle’s cigarette lighter or power socket.
When you use a cigarette-lighter adapter, you
might hear electrical noise from your engine
while scanning. This is normal.
NOTE