copying a frequency into a vacant channel
You can copy a frequency into a vacant channel
in a bank you specifi y when the scanner stops on
the frequency during search or tune mode.
when you fi nd a frequency
setting), then a vacant channel number
To copy the frequency into bank 10, press
. The scanner stores the frequency in the
fi rst available vacant channel in the bank.
Otherwise, enter any bank number then press
to store the frequency in the selected
bank. Channel number and frequency fl ashes
2 times. All the conditions such as delay
condition are copied on the channel. After
about 2 seconds, the scanner automatically
3. If you try to copy a frequency which is already
stored, the scanner sounds the notice tone
If you want to copy the duplicate frequency
copying a frequency into the
You can copy a frequency into the priority channel
(see “Priority”) when the scanner stops on the
frequency during Search, Scan, Manual, Tune, or
when the frequency appears.
To Next Page
Loading...
