manually tuning a frequency
You can manually set the scanner to move
through all receivable frequencies, or select a
specifi c frequency as a starting point.
. The currently-tuned frequency
Use the number keys to enter the frequency
where you want the scanner to start.
tune operation. To change the tune direction,
to tune up or down. When the
scanner fi nds an active frequency, it stops on
stopped on a frequency in MANUAL mode to
begin the TUNE function from that frequency.
For example, if the scanner is stopped
in MANUAL mode on channel 144 with
frequency 145.31000 MHz, pressing
will enter TUNE mode and automatically set
the TUNE frequency for 145.31000 MHz.
To Next Page
Loading...
