Radio Shack 8-IN-ONE REMOTE User Manual

7. Press EXIT to exit the programming mode.An [EXIT SETUP] message appears
as the remote returns to normal operation.
8. To verify the code works,aim the remote at the desired device,press its device
key once and then press
POWER once. The device should turn off. If it does not
respond, repeat steps 3 through 7,trying each code for your brand until you
find one that works.If you cannot find a code that works,try
Searching For
You r Co d e
on page 19.
NOTE: If the device does not have a POWER key, press (Play).
9. Repeat steps 1 through 8 for each device you want to control.For future
reference, write down each working device code in the boxes below:
VCR Code:
CBL Code:
SAT Code:
TV Code:
CD Code:
DVD Code:
AUDIO Code:
Audio Device Type:________________________________
AUX Code:
Aux. Device Type:________________________________
Programming A Device 17
USER’S GUIDE

Radio Shack 8-IN-ONE REMOTE Specifications

General

Brand	Radio Shack
Model	8-IN-ONE REMOTE
Category	Universal Remote
Language	English