30 Using My System
8-IN-ONE REMOTE
USING MY SYSTEM
The remote includes a custom My System mode for your devices.After the MY SYSTEM key is
programmed, it will allow you to access five groups of remote control keys without having to
change device modes. However, there are some considerations.
•
Keymoved, Learned,and Macro functions are affected by the My System mode.
If keys are moved (using
Keymover) or learned onto (using Learning) and they are
placed on keys not within the Control Groups, the keys will be ignored when pressed.
•A
Macro on the POWER key (if applicable) will carry over to the My System mode.
CONTROL ORGANIZATION
ABOUT CONTROL GROUPS
For My System programming, the remote’s keys are grouped by type of control into the
following five control groups:
(1) Playback Controls: REW, PLAY, FFWD,REC, STOP,and PAUSE
(2) Audio Controls: VOL+, VOL-,and MUTE
(3) Channel Controls: CH+, CH-, Keypad (0 ~ 9), ENTER, LAST, SLEEP, INFO,and TV/VIDEO
(4) Menu Controls: MENU, GUIDE, Cursor Controls (▲, ▼,,),SELECT,and EXIT
(5) PIP Controls: PIP, FREEZE, SWAP, MOVE,and +100
ABOUT DEVICE GROUPS
Moreover, the remote’s devices are grouped into the following five
device groups:
(1) Playback Group: VCR, CBL,SAT, CD, AUDIO,and DVD
(2) Audio Group: VCR, CBL, SAT, TV, CD, AUDIO, DVD and AUX
(3) Channel Group: VCR, CBL, SAT, TV, CD, AUDIO, DVD and AUX
(4) Menu Group: VCR, CBL, SAT, TV,and DVD
(5) PIP Group: VCR, CBL, SAT,and TV
The default Device Group settings from the factory is:
(1) Playback Group: VCR
(2) Audio Group: TV
(3) Channel Group: CBL
(4) Menu Group: CBL
(5) PIP Group: TV
▲
▲
To Next Page
Loading...
Need help?
General
