EasyManuals Logo

Radio Shack 8-IN-ONE REMOTE User Manual

Radio Shack 8-IN-ONE REMOTE
90 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
22 Using Learning/Changing Volume Lock
8-IN-ONE REMOTE
USING LEARNING (continued)
DELETING A FUNCTION FROM A LEARNING KEY
1. On the remote, press and hold P until the display changes from the default
device and time to
[CODE SET].
NOTE: Default values for device, its code, and time are shown above.Your remote control
settings may be different.
NOTE: If you wish to exit the programming mode at any time, press EXIT once. An
[EXIT] message appears as the remote control returns to normal operation.
NOTE:Ifan [INVALID] message appears, you have inadvertently pressed an incorrect
key. Simply note your error and continue programming.
2. Press three times until [IR DELETE] appears.
NOTE:Ifyou go past [IR DELETE],press one or more times to return to it.
3. Press SELECT once to begin programming. The last-selected device appears.
4. Press a device key once (e.g.,
TV) for the mode that contains the learned function.
5. Press the key once where the learned function (to be deleted) is stored.The
display changes to
[DELETED] and then returns to last-selected mode (e.g.,TV).
6. If desired, repeat steps 4 and 5 to delete other learned functions.
7. Press
EXIT to exit the programming mode.An [EXIT SETUP] message appears
as the remote returns to normal operation.
CHANGING VOLUME LOCK
In its default (unlocked) state, the remote allows each device to control its own volume
only in its own mode (e.g.,
TV volume in the TV mode, VCR volume in VCR mode, etc.).
However, using our
Volu me L oc k feature, you can lock the volume controls for each device
to all modes (e.g.,
AUDIO volume in all modes).
Moreover, using the
Volume Unlock feature (see the next page), you can further customize
the settings so that a devices volume controls are unlocked in one mode,but remain locked
in all other modes (e.g.,
TV volume in the TV mode and AUDIO volume in other modes).
PROGRAMMING VOLUME LOCK
1. On the remote, press and hold P until the display changes from the default
device and time to
[CODE SET].
(x 3)

Table of Contents

Other manuals for Radio Shack 8-IN-ONE REMOTE

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Radio Shack 8-IN-ONE REMOTE and is the answer not in the manual?

Radio Shack 8-IN-ONE REMOTE Specifications

General IconGeneral
BrandRadio Shack
Model8-IN-ONE REMOTE
CategoryUniversal Remote
LanguageEnglish

Related product manuals