INSTALLING BATTERIES
Your remote requires four AAA batteries (not supplied) for power. For the best performance
and longest life,we recommend using RadioShack alkaline batteries.
CAUTIONS:
• Use only fresh batteries of the required size and recommended type.
• Do not mix old and new batteries, different types of batteries (e.g., standard, alkaline,
or rechargeable), or rechargeable batteries of different capacities.
• If you do not plan to use the remote for an extended period, remove the batteries.
Batteries can leak chemicals that can destroy electronic parts.
WARNING: Dispose of old batteries promptly and properly. Do not burn or bury them.
TO INSTALL BATTERIES:
1. Press the tab on the battery compartment cover (located on the back of the remote)
and lift off the cover.
2. Place the AAA batteries in the compartment as indicated by the polarity symbols
(+ and –) marked inside.
3. Align the cover key with the compartment opening and replace the cover.
4. If batteries are inserted correctly, the entire LCD will turn on.After 5 seconds of
inactivity, the remote control will turn itself off to conserve battery life.
5. Perform the steps in
Setting The Clock (on the next page) to set the correct time.
NOTE: When a battery icon appears in the display (see page 7,“Key Functions”), the batteries are low.
Simply replace them as soon as possible and the remote will be restored to full functionality, complete
with your favorite settings.
4 Installing Batteries
8-IN-ONE REMOTE
To Next Page
Loading...
Need help?
General
