Radio Shack 8-IN-ONE REMOTE User Manual

32 Using My System
8-IN-ONE REMOTE
USING MY SYSTEM
PROGRAMMING MY SYSTEM (CONTINUED)
4. Press SELECT once to enter Audio Control Group assignment.The last-selected
device (e.g.,
[VCR]) appears.
a. Select a device for
Audio Control Group assignment.For this example, press
TV once.This will assign the entire group of Audio Controls (i.e., VOL+, VOL-,
and
MUTE) to the TV. Your device choice (e.g.,[TV]) appears.
b. Press
SELECT once to accept the assignment in step 4a.The next Control
Group
assignment,[CHANNEL]) appears.
5. Press
SELECT once to enter Channel Control Group assignment.
The last-selected device (e.g.,
[TV]) appears.
a. Select a device for
Channel Control Group assignment.For this example,
press
CBL once.This will assign the entire group of Channel Controls (i.e.,
CH+,CH-,Keypad (0 ~ 9), ENTER, LAST, SLEEP, INFO,and TV/VIDEO) to
the cable converter.Your device choice (e.g.,
[CBL]) appears.
b. Press
SELECT once to accept the assignment in step 5b. The next Control
Group
assignment,[MENU]) appears.
6. Press
SELECT once to enter Menu Control Group assignment. The last-selected
device (e.g.,
[CBL]) appears.
a. Select a device for
Menu Control Group assignment.For this example, press
CBL once.This will assign the entire group of Menu Controls (i.e., MENU,
GUIDE, Cursor Controls (▲,▼,,),SELECT,and EXIT) to the cable
converter.Your device choice (e.g.,
[CBL]) appears.
b. Press
SELECT once to accept the assignment in step 6a.The next Control
Group
assignment,[PIP]) appears.
▲
▲

Radio Shack 8-IN-ONE REMOTE Specifications

General

Brand	Radio Shack
Model	8-IN-ONE REMOTE
Category	Universal Remote
Language	English