When the voice prompt function is enabled, the corresponding channel will be broadcast by voice.
5.7 Selecting a Bank
A bank is a group of channels with the same property. The radio supports up to 10 banks, with a maximum of 100 channels per bank. To select a
bank, do one of the following:
Press [MENU] key go to Menu > Bank, press or navigation key to select a bank, and then press [MENU] key to switch to the selected bank.
The corresponding regional alias will be displayed at the bottom of the screen.
5.8 Making a call
press [P1] key to switch between frequency (VFO) mode and channel (MR) mode.
• Channel mode call: After selecting a channel, hold down the [PTT] key to initiate a call to the current channel. Speak into the microphone with
normal tone. Making a call, the red LED is on.
• Receive a call: When you release the [PTT] key, you can answer it without any action.
When receiving a call, the green LED is on.
NOTE: To ensure the best reception volume, keep the distance between the microphone and the mouth at the time of transmission from 2.5
cm to 5 cm.
5.9 Emergency Alert
The Emergency Alert feature can be used to signal members in your group for help.
To activate the emergency alert function, press and hold the [SK1] key for 3 seconds. The radio will send out a loud siren sound and the
flashlight will flash.
Press the [SK1] key to exit the emergency alert function.
WARNING: The Emergency Alert feature should only be used in the even of an actual emergency.
5.10 FM Radio (FM)
The frequency ranges to listen to the radio is 65-108MHz. When listening to broadcast FM, press [MENU] key switches between 65-75 MHz and
76-108 MHz band.
(1) In frequency or channel mode, Press [SK1] key to turn on the radio.
(2) Select the desired radio frequency with the or keys or input the frequency. Or
To Next Page
Loading...
