two receivers (known as Dual Receive or Dual VFO). The former method is cheaper to implement and far more common than the latter.
The radio features Dual Watch functionality (single receiver) with the ability to lock the transmit frequency to one of the two channels it
monitors.
Enabling or disabling Dual Watch mode
(1) Press the [MENU] key to enter the main menu.
(2) Enter 3 on the numeric keypad to get to Radio Settings.
(3) Press the [MENU] key to confirm, enter 15 on the numeric keypad to get to 15 Dual Watch.
(4) Press the [MENU] key to select.
(5) Use the or keys to enable or disable.
(6) Press the [MENU] key to confirm.
(7) Press [EXIT] to return to the previous menu.
The dual watch function is turned on, and the icon 'D' is displayed on the top line of the screen.
·
Repeat the above operation, select "OFF", the dual watch function is disabled, and the icon 'D' on the top line of the screen disappears.
Note: When the dual watch function is turned on, the icon 'D' is displayed on the screen, and the "Singal Mode" submenu is automatically
shielded in the radio setting menu.
After the dual watch is turned off, the radio setting menu will automatically add "Singal Mode". After turning on the single display mode, the
radio will display the channel name, frequency and channel sequence on the same screen.
7. MAIN MENU FUNCTIONS
The menu function allows you to perform operations such as selecting Banks, Setting SCAN, Radio Settings, Program Channels, and viewing
Radio Information.
7.1 Basic use
Use menus with arrow keys
(1) Press the [MENU] key to enter the main menu.
(2) Use the or keys to navigate between menu items.
(3) After finding the desired next menu item, press the [MENU] key again to select the menu item.
(4) Use the or keys to navigate between the next menu items.
To Next Page
Loading...
