1.3 Features and Functions
• 1.77" TFT large screen, full keyboard, fully open menu operation
• Scanner function: VFO scan range setting, three scan recovery methods, channel scan, CTC/DCS scan, scan channel
addition and removal
• 22 Modifiable GMRS Channels (RX &TX) • 8 Modifiable GMRS Repeater Channels (RX & TX)
• Built-in input method, allows this device to edit channel name
• NOAA Weather Radio Channel Reception in the United States and Canada
• Frequency step, selectable between 2.5K | 5.0K | 6.25K | 10.0K | 12.5K | 20.0K | 25.0K | 50.0K
• Type-C direct charging and charging stand, more convenient battery life
• Dual-band handheld transceiver. • DTMF encoder and DTMF manual dial
• High Capacity Lithium-Ion battery. • Broadcast FM radio receiver 78-108 MHz
• 50 CTCSS tones and 105 DCS codes. • VOX (voice activated transmit).
• 10 zones storage, Up to 1000 named memory channels. • Alarm function.
• High or low power selectable. • Display illumination programmable via keypad.
• Function beep on the keyboard. • Dual watch / Dual reception.
• Programmable repeater offset. • Battery saving function.
• Transmission time-out timer. • Scan mode.
• Busy channel lock out. • Built in CTCSS/DCS tones.
• Ten (10) levels of Squelch adjustment. • Cross band reception.
• End of transmission tone, aka “Roger Beep”. • One touch search frequency
• Two (2) pins for Kenwood accessory port
• GPS positioning function, location sharing and requesting location information from others
To Next Page
Loading...
