Appendix C. - Shortcut Menu operations
Menu Name Setting Description
1 BANK 1 BANK 1 Channel1-Channel100
A Bank is a group of channels grouped together. The radio has 10
Banks. A Bank can have the maximum of 100 channels.
2 SCAN
1 Freq Ranger NNNNnnn Input VFO range lower and upper frequency
2 Scan Mode
Time
Time Operation - scanning will resume after a fixed time has
passed
Carrier
Carrier Operation -scanning will resume after the signal
disappears
Search Search Operation -scanning will not resume
3 Scan SubCode
CTCSS Search within CTCSS Tone (Rang 67-254.1, A total of 50 groups)
DCS Search within DCS Code (Rang 023N-754I, A total of 210 groups)
4 Scan Memory
ALL
RX_TX are saved
(default is all, encoding and decoding are the same)
DECODER Save only in Transmitter CTCSS/DCS
ENCODER Save only in Receiver CTCSS/DCS
3
Radio
Setting
1 Step 2.5-100K
Selects the amount of frequency change in VFO/Frequency mode
when scanning or pressing the or keys.
2 Squelch OFF,LEVEL1-LEVEL5
Squelch silences the receiver when there is no signal. Setting the
squelch to 0 will open up the squelch entirely.
3 Power Save
OFF
Turn off radio sleep. The battery consumption is large, and the
standby time may be shortened
ON
Turn on radio sleep. Turning on is more power efficient, but you
might miss the first few syllables before the RX turns on.
4 VOX Switch
OFF Turn off the radio VOX.
ON Turn on the radio VOX.
5 VOX Level LEVEL1-LEVEL9
When enabled it is not necessary to push the [PTT] button on the
To Next Page
Loading...
