The SK2 key allows users to customize functions:
• FM RADIO: FM radio on/off.
• SCAN: Scan on/off.
• SEARCH: one touch Search on/off.
• VOX: Vox on/off.
(26) Reset (Reset) – MENU + 26
With this function you can reset the transceiver to the factory-programmed settings and parameters. After that, you can set the desired
functions. There are two types of reset:
• VFO: Menu Reset
• ALL: Menu and channel Reset
7.4 GPS function
The position system is a typical DTMF calling application. For the method of setting call codes, call names, and local IDs, please refer to
"Signaling Calls".
It is necessary to ensure that the radios that receive and send GPS location information operate on the same frequency or channel, and are set
to the main frequency band.
In GPS mode, you can only view location information and cannot make normal calls. Voice intercom must exit GPS mode in order to proceed.
You can set the system time, GPS on/off, time zone, and GPS mode through the position system menu. Press [GPS] key to view, share, and
request location information.
(1) GPS on/off settings
Set path: [MENU] + 4 + [MENU]: Press the / key to select whether to turn GPS ON/OFF.
*After turning on the position system, the screen displays the icon
(2) Time zone settings:
Set path: [MENU] + 4 + [MENU] + 2: Press the / key to select the correct time zone.
To Next Page
Loading...
