30 Chapter 2
Customising the workstationCustomising the workstation
Customising the workstationCustomising the workstation
Customising the workstation
You can assign a name to your workstation, which will be permanently
displayed in the title bar of the Main window. Typing the name will
allow you to get used to using the instruments keypad.
1. Before leaving the Configuration menu:
• Select PC keyboard,
• select English (US).
This allows you to use a QWERTY keyboard.
2. Press Esc to return to the SETUP menu.
3. Press 3 (Customise).
4. Press
✓✓
✓✓
✓ to select the Station parameter.
5. To replace "TIM960" by "Chem.lab-1", proceed as follows:
• Press 7 until the letter "C" appears, then release the key. The
cursor moves to the next position.
Customise screen
displayed for a
TIM960.
To Next Page
Loading...
