General information
All the solutions described in this chapter are for in vitro diagnostic use.
In Vitro
Diagnostic Use
Solution
numbers
Each solution is identified with an "S" and is followed by 4 or 5 digits. The name
of the solution comes after the number.
Gas names
The two gas mixtures used by the analyzer are named Gas 1 and Gas 2.
Expiration date
The expiration date of a solution found on the label or on a sticker on the side of
the container is stated as a month and year. Do not use a product after its expiration
date.
Safety Data
Sheets
Safety Data Sheets for all solutions are available from your Radiometer distributor.
Re-ordering
Information for re-ordering solutions from Radiometer can be found in the
ABL800 FLEX Operator’s Manual,
Chapter 14.