RADWAG AS 310.R2 User Manual

- 149 -
• SUFFIX - 1D564108 (paper crop for EPSON printers equipped
with an auto cutter blade)
If on the printout in the place of the last digit there are any unexpected signs (for
verified balances), than <P4.2.2 PREFIX> parameter should incorporate, apart
from code page, code of the UK signs chart: 1B5203. In such a case the <P4.2.2
PREFIX> parameter setting should be as follows:
• PREFIX - 1B742D (1250 code page and UK signs chart)
Control codes for example code pages:
Control code
Page or other command
1B742D
code page 1250
1B7410 code page 1252
1B7430 Code page 1254
1B5203 UK signs chart
1B5202 DE signs chart
1D564108 Paper crop
0C Form feed (for PCL printers)
19.3. Bar code reader
The submenu <BAR CODE READER> includes the balance settings for
cooperation with the bar code reader.
Procedure:
− press
button
− enter the menu <P4 DEVICES>
− and then enter in menu group <P4.3 BAR CODE READER>
− set the balance parameters related to the cooperation with the bar
code reader
<P4.3.1 PORT> - choice of the port, to which the bar code reader is
to be connected
o accessible options: NONE, COM 1, COM 2
19.4. Additional display
The submenu <ADDITIONAL DISP.> includes the balance settings for
cooperation with the external additional display.

RADWAG AS 310.R2 Specifications

General

Maximum Capacity	310 g
Readability	0.001 g
Repeatability (Standard Deviation)	0.001 g
Linearity	±0.002 g
Stabilization Time	2 s
Display	LCD
Communication Interface	RS-232
Power Supply	100 - 240 V AC 50 / 60 Hz
Operating Temperature	10 °C - 40 °C
Calibration	External